CityNetek CN-201(社區寬頻)在 vista 的安裝心得

侯捷

2008/05/07


詢問Sparq(0809-080080),得知元訊公司電話 03-3163356, 03-3163393

去電元訊,服務人員告知需自其網站 www.cbbn.com.tw 下載 driver for vista。並在詢問我的box外觀為三孔後,告知我的設備是東訊。

進入元訊網站:

wpe2.jpg (24346 bytes)

進入【檔案下載】:

wpe3.jpg (51000 bytes)

點選【東訊(TECOM)】出現【檔案下載】對話框:

wpe5.jpg (16881 bytes)

點選【儲存檔案】,並指定放置路徑(我放在 e:\share):

wpe4.jpg (20913 bytes)

於是得到 TECOM USB.zip。移至 vista 電腦並解壓縮置於 e:\share\citynetek(自取的名稱):

wpe6.jpg (35395 bytes)

其 version.txt 內容是(其實無用):

USB TO 10/100M Fast Ethernet 1M HomePNA Adapter

Driver Disk Version 2.12

其 Readme.txt 內容是(其實無用):

USB to 10/100 Ethernet,
1M HomeNet
Adapter

-------------------------------
Windows 98/ME Setup
-------------------------------
1. Once the USB Adapter is connected to your computer, Windows 98/ME
will automatically detect the new hardware device as shown below. Click
Next.

2. Insert the driver diskette into your floppy drive. When Windows prompts
you What do you want Windows to do? Select Search for the best
driver for you device. (Recommended) . Click Next.

3. Follow the on-screen instruction to proceed.

4. Windows will finish copying all the necessary files to your system. When
the following window appears, click Finish.

5. When asked if you want to restart your computer, Click No.

6. Once you are back at the Windows 98/ME desktop, click the Start button.
Click Settings, then Control Panel.

7. Double-click the Network icon. The Network window will appear. Click
the Configuration tab.

8. Make sure that the following network components are installed:

    Client for Microsoft Networks
    USB To Fast Ethernet/HomePNA Adapter
    NetBEUI
    TCP/IP

9. If you are missing required components, you'll need to install them
manually. If you need to install the TCP/IP Protocol, contact your system
administrator or refer to the Windows documentation .

10. In the Primary Network Logon box, select Client for Microsoft
Networks.

11. Click the Identification tab. Enter the required information appropriately.

12. Click the Access Control tab. Make sure that Shared-level access
control is selected.

13. When finished, remember to restart your computer to activate the new
device.

-------------------------------
Windows 2000 Setup
-------------------------------

1. Once the USB adapter is connected To the computer,
the USB To Fast Ethernet / HomePNA adapter will be found and the system
will assign the default network driver to the adapter.
2. Select "Control Panel" from "Start" menu bar
3. Select "Network and Dial-Up Connection" folder then click "Local Area
Connection" and "Properties".
4. Click "Configure" item and select "Driver"
5. From the "Driver" item then choose "Update Driver"
6. The system will prompt two optional for driver search, one is auto search
and the other is "Display a list of known drivers ….". Please select
second one "Display …".
7. The system will prompt for driver installation and please select
"Have Disk" button.
8. Key in a:\ path to install driver for the adapter

-------------------------------
Windows XP Setup
-------------------------------

1. Once the USB adapter is connected to the computer,
the USB To Fast Ethernet/ HomePNA Adapter will be found and the system
will assign the default network driver to the adapter.
2. Select "Control Panel" from "Start" menu bar
3. Select "Network Connection" folder then click "Local Area Connection"
and "Properties".
4. Click "Configure" item and select "Driver"
5. From the "Driver" item then choose "Update Driver"
6. The system will prompt two optional for driver search, one is auto search
and the other is "Display a list of known drivers ….". Please select
second one "Display …".
7. Choose "Install from a list or specific location(Advanced)" and
click "Next".
8. Select "Don't search, I will choose the driver to install" then
click "Next".
9. The system will prompt for driver installation and please select
"Have Disk" button.
10.Key in a:\ path to install driver for the adapter.


再至剛才的【檔案下載】網頁的最下點選【安裝說明】(for vista)。其內容主要如下(注意,在 vista 上操作):

1. 以滑鼠左鍵點擊畫面左下角的[開始]鈕。

2. 滑鼠左鍵點擊 [開始] 鈕上方的 [開始搜尋] 欄位。

3. 輸入 devmgmt.msc 之後按Enter鍵。 jjhou: 這時會找出並啟動 "裝置管理員"。接下來(以下步驟)便是在 "裝置管理員" 工作。

4. 如圖以滑鼠左鍵在 [USB To LAN Converter] 這個項目連點兩下。jjhou:這是在 "其他裝置" 中出現。必須先把 box USB 插入才會有此項。而且出現的字樣也不一定是 "USB To Lan Converter"。例如我的是 "AN986 USB to Fast Ethernet Adapter"。

5. 點擊 [驅點程式] 切換到如下圖這個頁次後,再點擊 [更新驅動程式(P)...] 按鈕。

200805vista-1.jpg (40289 bytes)

6. 再來就是捨棄自動搜尋,改點選「瀏覽電腦上的驅動程式軟體」,然後在畫面上手動輸入或瀏覽選擇驅動程式的路徑(例如我的是 e:\share\citynetek),然後 vista 會詢問安全性(因為無法驗證發行者),我應選擇「仍安裝此驅動程式軟體」,安裝好後網路即通,而 "裝置管理員" 中的 "網路介面卡" 會多出現一個 "AN986 USB to Fast Ethernet Adapter"。

200805vista-2.jpg (60149 bytes)